Est.1996 0499 649 685
What we pourConcrete drivewaysHouse & shed slabsExposed aggregateDecorative & stampedPaths, patios & pool surroundsResurfacing & sealingEpoxy flooringCovercreteCommercial & civilAll services
Service areasConcreting in CabooltureConcreting in NarangbaConcreting in CaloundraConcreting in BuderimAll service areas
Recent workAboutContact
Get a quote Call 0499 649 685

Paths, patios and pool surrounds, with the falls set right.

Smaller pours, tighter access and more detail than a driveway. Where water and bare feet meet, the finish matters more than anywhere else on the property.

30+Years on the tools, since 1996
8Tradesmen, all on our own books
4.6★From 33 Google reviews
Queensland Building and Construction Commission QBCC 700727Licensed contractor Housing Industry Association HIA 222105Member
What you get

Small pours are where the detail shows.

A driveway is mostly a big flat area. A path down the side of a house, a patio under a pergola or a surround around a pool is all edges, falls, steps and awkward access. There is nowhere to hide a bad edge.

The falls are the thing people underestimate. Water has to run away from the house and the pool and into somewhere sensible, and it has to do it without the surface looking tilted. Getting that right is set-out, not finishing.

Where people will be walking barefoot or on a wet surface we will steer you towards a finish with texture, and lighter stone so it does not cook in January.

Two of the Livingstone crew screeding a freshly poured pool surround
On the toolsPool surround
Included in the price

What the number covers.

  • Set out including the falls and where water goes
  • Excavation and cart away of spoil
  • Compacted base and steel on chairs
  • Formwork including curves, steps and edges
  • Concrete supply, place and finish in the finish you chose
  • Saw-cut control joints
  • Barrow access protected and the site left clean
Quoted separately

What it does not.

  • Drainage pits, pipework and connection to stormwater
  • Pool fencing and barrier compliance work
  • Retaining walls or landscaping
  • Sealing, quoted as an option
Specification

The numbers we build to.

Paths, patios and pool surrounds
Thickness100mm typical for foot traffic
ReinforcementSL72 mesh on chairs
Concrete grade25 MPa standard, 32 MPa on reactive soil
Typical path width900mm to 1200mm
FallsSet away from the house and the pool
Recommended finishExposed aggregate or textured where wet
Our work

Jobs we have finished.

Every photo on this page is our own work. None of it is stock.

Two of the Livingstone crew screeding a freshly poured pool surround
On the toolsPool surround
Light exposed aggregate path beside a garden bed
Light exposed aggregateSide access path
Plain concrete with diamond saw-cut joints and a burnished finish
Plain, saw-cutPatio
How it works

From the day you say yes.

No guessing what happens next, and no three-week silence after the quote goes out.

01

We measure it properly

On site, with the specs written down: thickness, grade, mesh, finish and access. The quote is itemised so you can see what each part costs.

02

Date booked, concrete ordered

You get a pour date, not a vague week. The mix is ordered to the spec on your quote and the crew is locked in around it.

03

Dig, base and steel

Excavation out, road base in and compacted, formwork set to the falls, mesh laid on bar chairs. The part that decides whether it lasts.

04

Pour, finish and cut

Placed, screeded and finished the way you chose, then control joints saw-cut once it is hard enough. We tell you when you can drive on it.

Questions

Worth asking before you commit.

What finish is best around a pool?
Something with texture. Exposed aggregate is the usual answer because the stone gives grip without being harsh underfoot, and lighter stone stays cooler in summer. A smooth trowelled finish looks good dry and is unpleasant wet, so we would not put it around a pool.
Do pool surrounds need special rules?
The concrete itself is standard, but the falls matter: water has to run away from the pool and the house, into the right place. There are also pool barrier rules that affect where fences and gates land, which can change the shape of the slab. We will work in with your pool builder or fencer.
How wide should a path be?
A side access path is usually 900mm to 1200mm. Under 900mm gets awkward with a wheelbarrow or a bin. If it is a main entry path, wider again looks more generous and does not cost much more because the setup is the same.
Can you match a new path to existing concrete?
We can get close, but an exact match to concrete poured years ago is not realistic. Concrete changes colour as it ages and the original mix will not be available. Often the better answer is a deliberate contrast, or resurfacing both so they match each other.
Where we pour

Moreton Bay out to the Sunshine Coast.

We are based at Elimbah, which puts Caboolture, Bribie, the hinterland and the coast itself inside an easy run. Eight tradesmen and our own plant means a job down the road and a job an hour away both get a full crew.

See all service areas
Get a price

Tell us what you are paving and we will come and look at the access.

Pool surrounds and side paths are usually decided by access and falls. It takes ten minutes on site to work out and it changes the price, so we would rather see it than guess.

Or just ring

Tell us about the job.

Takes about a minute. The more you can tell us, the closer the first number will be.

We will ring you back to arrange a site visit. The visit and the quote are both free.

Got it, thanks.

We have your details and will be in touch to arrange a time to come and measure it. If it is urgent, ring 0499 649 685 and you will get someone straight away.

Call us Get a quote