Est.1996 0499 649 685
What we pourConcrete drivewaysHouse & shed slabsExposed aggregateDecorative & stampedPaths, patios & pool surroundsResurfacing & sealingEpoxy flooringCovercreteCommercial & civilAll services
Service areasConcreting in CabooltureConcreting in NarangbaConcreting in CaloundraConcreting in BuderimAll service areas
Recent workAboutContact
Get a quote Call 0499 649 685

Concreters in Caboolture.

Caboolture is ten minutes from our yard at Elimbah, which makes it the suburb we pour in most. Driveways, slabs, patios and commercial work, with our own crew and our own plant.

30+Years on the tools, since 1996
8Tradesmen, all on our own books
4.6★From 33 Google reviews
Queensland Building and Construction Commission QBCC 700727Licensed contractor Housing Industry Association HIA 222105Member
Concreting in Caboolture

Our closest major centre.

We are based just up the road at Elimbah, so Caboolture is effectively our home patch. That matters more than it sounds: short runs mean the crew is on the tools rather than in the ute, and it is easy for us to come back if you want something looked at.

Caboolture covers a lot of ground, from older established streets through to the newer estates out towards Morayfield and Burpengary. The two need different things. An established block usually means working around mature trees, existing levels and a driveway that has already been replaced once. A new estate block is more often a clean dig, but with tight boundaries and a crossover that has to meet council requirements.

What we pour in Caboolture

Local jobs, same crew.

  • Concrete driveways and crossovers
  • House and shed slabs
  • Exposed aggregate, stencil and stamped finishes
  • Paths, patios and pool surrounds
  • Resurfacing and sealing
  • Commercial and civil work
Worth knowing locally

What a Caboolture job usually involves.

01

Established blocks need the levels checked

Older Caboolture streets have had a lot of work done over the years. Before we quote a replacement driveway we check where water currently goes, because the easiest way to create a problem is to pour a new slab at the old levels without asking why the old one failed.

02

Crossovers need council approval

The section between the kerb and your boundary is council's, and in Moreton Bay that generally means an application. We will tell you whether your job needs one when we measure it.

03

Reactive soil is common through here

A lot of this area is reactive clay. Where the site class is H1 or H2 under AS 2870, the concrete steps up to 32 MPa and the detail gets heavier. We check the classification before pricing rather than after.

Our work

Finishes we pour around here.

Our own jobs across Moreton Bay and the Sunshine Coast. None of it is stock.

Charcoal exposed aggregate path leading to a timber-lined entry
Exposed aggregateNew home driveway
Coloured and stencilled driveway with a diamond feature inlay
Stencilled brickResidential driveway
Terracotta stencilled driveway in a random flagstone pattern
Formed and steel-fixedHouse slab
How it works

From the day you say yes.

No guessing what happens next, and no three-week silence after the quote goes out.

01

We measure it properly

On site, with the specs written down: thickness, grade, mesh, finish and access. The quote is itemised so you can see what each part costs.

02

Date booked, concrete ordered

You get a pour date, not a vague week. The mix is ordered to the spec on your quote and the crew is locked in around it.

03

Dig, base and steel

Excavation out, road base in and compacted, formwork set to the falls, mesh laid on bar chairs. The part that decides whether it lasts.

04

Pour, finish and cut

Placed, screeded and finished the way you chose, then control joints saw-cut once it is hard enough. We tell you when you can drive on it.

Questions

Asked by Caboolture locals.

Do you do a lot of work in Caboolture?
Yes, more than anywhere else. The yard is at Elimbah, about ten minutes up the road, so Caboolture is our closest and busiest area.
Do I need council approval for a driveway in Caboolture?
For the crossover, the bit between the kerb and your boundary, generally yes through Moreton Bay Regional Council. The part inside your property usually does not need approval. We will tell you which applies to your job.
Why does my neighbour's quote differ so much from mine?
Usually thickness, mesh and base. Two driveways the same size can be genuinely different jobs once you account for the dig, the soil classification and whether the spoil is being carted away. That is why our quotes are itemised.
Can you match the concrete to my existing path?
We can get close but not exact. Concrete changes colour as it ages and the original mix will not be available. Often the better answer is resurfacing both so they match each other.
Get a price

Pouring in Caboolture this month.

Tell us the address and what you want done, and we will come and measure it. You will get an itemised quote with the thickness, the grade, the mesh and the finish written down.

Or just ring

Tell us about the job.

Takes about a minute. The more you can tell us, the closer the first number will be.

We will ring you back to arrange a site visit. The visit and the quote are both free.

Got it, thanks.

We have your details and will be in touch to arrange a time to come and measure it. If it is urgent, ring 0499 649 685 and you will get someone straight away.

Call us Get a quote